We manufacture the FGI-4000-AP, an inline Gravity Bottle Filling Machine, with loads of features for filling your needs now and into the future. This gravity filler is designed for water and other low viscosity liquid products. It has a heavy duty 304 Stainless steel welded C frame. All contact parts are stainless steel and sanitary polymers. An Omron PLC controls all machine logic functions. It is programmable, with special modifications on programs available for special applications. It includes a 40 Gallon per minute double diaphragm pump for feeding tank supply.

Construction features:

• 304 Stainless steel heavy duty stainless steel welded C frame.
• 20 Gallon stainless steel overflow tank.
• Stainless steel cover for overflow tank.
• 20 Gallon feeding tank with float valve.
• Stainless steel cover for feeding tank.
• 20 hose 304 stainless steel feeding manifold.
• All contact parts are stainless steel, sanitary, Teflon, viton and hoses per your requirements.
• Special seals or hoses by order.
• Calibrated guide for fast height changeovers.
• Machine mounted on 4 heavy duty casters.
• Leveling of machine by 1 inch 304 stainless steel leveling screws.

Control panel features:

• Omron PLC for all machine logic functions, special modifications on programs available for special adaptations.
• Front panel filling time adjustment trough Omron Timer.
• Front panel conveyor speed control for machine sold with conveyor.
• Front panel mounted bottle counter.
• Front panel Start and Emergency STOP for easy access.
• Front panel nozzle code for changing nozzle quantities.
• Fiber optic sensors by Omron standard for container gating.
• Expandable to 20 nozzles to increase speed.
• No bottle no fill PLC controlled.

Main components features:

• 40 Gallon per minute double diaphragm pump for feeding tank supply.
• Hardened Stainless steel calibrated shafts with linear bearings for nozzle rack movement smoothness and durability.
• 8 inch stroke air cylinder with magnetic sensors for nozzle up and down movement.
• Hand wheel and shaft mounted stoppers for height and stroke adjustment.

Standard features:

• Nozzle spacing fully adjustable through top screw.
• Container height adjustment from 1½ to 16 inches high.
• Nozzle stroke adjustments from 0 to 8 inches.
• Entry and exit bottle gating cylinders adjustable, sideways, up and down and inside and outside.
• Will work with plastic or glass containers.
• No change parts needed for various types of containers.
• Air filter-regulator and safety lockout valve included. Air filter regulator, safety lockout valve and valve activated by float on tank are mounted on the pump.
• Spacing and additional bottle control obtained by flow controls mounted on air gating cylinders.

Electric and pneumatic requirements:

• 110 Volts, 60Hz, 15 Amp.
• 10 CFM @ 80 p.s.i.